Cupra Ateca 2.0 TSI 300bhp tuning file
2018 (2019) · Petrol · ECU: Siemens/Continental Simos 18.10
Stage 1 remap: +50 bhp & +80 Nm
ECU
Read methods
Available solutions
Upload the original read of your Cupra Ateca 2.0 TSI 300bhp and we'll return a Stage 1 tuning file worth 350 bhp and 460 Nm – up from 300 bhp and 380 Nm, an increase of +50 bhp (17%) and +80 Nm. Every file is checked by a calibrator on the Siemens/Continental Simos 18.10 before release, and Anti lag, DECAT, DTC Removal, Launch control can be combined in one upload.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 300 → 350 bhp equals roughly 224 → 261 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1984 CC |
| Compression ratio | 9.3 : 1 |
| Bore × stroke | 82.5 X 92.8 mm |
| Engine code | DNUE |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.