Chrysler Pacifica 3.6 V6 287bhp tuning file
2017– · Petrol · ECU: Siemens/Continental GPEC2A
Stage 1 remap: +18 bhp & +20 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Chrysler Pacifica 3.6 V6 287bhp from 287 bhp and 355 Nm to 305 bhp and 375 Nm – that's +18 bhp (6%) and +20 Nm more. The remap file is written by a calibrator for your exact software on the Siemens/Continental GPEC2A and returned through the portal, normally within 5–15 minutes. Solutions such as DECAT, DTC Removal, FLAPS, Pop & Bang Crackle map can go into the same file.
Who is this remap for?
Naturally aspirated petrol engines gain less than turbo engines, but a remap still improves throttle response and smooths out flat spots in the power delivery. 287 → 305 bhp equals roughly 214 → 227 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 3604 CC |
| Compression ratio | 11.3 : 1 |
| Bore × stroke | 96.0 X 83.0 mm |
| Engine code | 3.6 Pentastar V6 |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.