BMW 3 serie 320d 190bhp tuning file
G2x (2019–) · Diesel · ECU: Bosch MD1CS001
Stage 1 remap: +30 bhp & +80 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the BMW 3 serie 320d 190bhp from 190 bhp and 400 Nm to 220 bhp and 480 Nm – that's +30 bhp (16%) and +80 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MD1CS001 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF OFF, DTC Removal, EGR OFF, START/STOP OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 190 → 220 bhp equals roughly 142 → 164 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1995 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 84.0 X 90.0 mm |
| Engine code | B47D20 |
Other BMW 3 serie G2x (2019–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.