BMW 3 serie 328D 180bhp tuning file
F3x (2011–2015) · Diesel · ECU: Bosch EDC17
Stage 1 remap: +90 bhp & +120 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the BMW 3 serie 328D 180bhp from 180 bhp and 380 Nm to 270 bhp and 500 Nm – that's +90 bhp (50%) and +120 Nm more. The remap file is written by a calibrator for your exact software on the Bosch EDC17 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF OFF, DTC Removal, EGR OFF can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 180 → 270 bhp equals roughly 134 → 201 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1995 CC |
| Compression ratio | 16.5 : 1 |
| Bore × stroke | 84.0 X 90.0 mm |
Other BMW 3 serie F3x (2011–2015) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.