Audi SQ5 3.0 TFSI 354bhp tuning file
FY - MK1 (2017–2019) · Petrol · ECU: Bosch MG1CS002 / Siemens/Continental Simos 8.5
Stage 1 remap: +46 bhp & +100 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi SQ5 3.0 TFSI 354bhp gains +46 bhp and +100 Nm, rising from 354 bhp / 500 Nm to 400 bhp / 600 Nm (13% more power). We build each tuning file around the software number of your read on the Bosch MG1CS002 / Siemens/Continental Simos 8.5, so nothing generic goes back into the car. Add DTC Removal to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 354 → 400 bhp equals roughly 264 → 298 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 2995 CC |
| Compression ratio | 11.2 : 1 |
| Bore × stroke | 84.5 X 89.0 mm |
| Engine code | CWGD |
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.