Audi Q8 50 TDI (3.0D) 286bhp tuning file
2018– · Diesel MHEV · ECU: Bosch MD1CP004
Stage 1 remap: +64 bhp & +120 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi Q8 50 TDI (3.0D) 286bhp gains +64 bhp and +120 Nm, rising from 286 bhp / 600 Nm to 350 bhp / 720 Nm (22% more power). We build each tuning file around the software number of your read on the Bosch MD1CP004, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 286 → 350 bhp equals roughly 213 → 261 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel MHEV |
| Engine size | 2967 CC |
| Compression ratio | 11.2 : 1 |
| Bore × stroke | 83.0 X 91.4 mm |
| Engine code | DPXA |
Other Audi Q8 2018– engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.