Audi Q7 3.6 FSI 280bhp tuning file
4L MK2 (2010–2014) · Petrol · ECU: Bosch MED9
Stage 1 remap: +22 bhp & +24 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Audi Q7 3.6 FSI 280bhp from 280 bhp and 360 Nm to 302 bhp and 384 Nm – that's +22 bhp (8%) and +24 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MED9 and returned through the portal, normally within 5–15 minutes. Solutions such as Anti lag, DECAT, DTC Removal, FLAPS can go into the same file.
Who is this remap for?
Naturally aspirated petrol engines gain less than turbo engines, but a remap still improves throttle response and smooths out flat spots in the power delivery. 280 → 302 bhp equals roughly 209 → 225 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 3597 CC |
| Compression ratio | 12.0 : 1 |
| Bore × stroke | 89.0 X 96.4 mm |
| Engine code | BHK |
Other Audi Q7 4L MK2 (2010–2014) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.