Audi Q5 2.0 TDI CR 163bhp tuning file
FY - MK1 (2017–2018) · Diesel · ECU: Bosch EDC17C46 / Bosch EDC17C74
Stage 1 remap: +57 bhp & +70 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi Q5 2.0 TDI CR 163bhp gains +57 bhp and +70 Nm, rising from 163 bhp / 380 Nm to 220 bhp / 450 Nm (35% more power). We build each tuning file around the software number of your read on the Bosch EDC17C46 / Bosch EDC17C74, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 163 → 220 bhp equals roughly 122 → 164 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 15.5 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | CGLA |
Other Audi Q5 FY - MK1 (2017–2018) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.