Audi Q3 2.0 TFSI 220bhp tuning file
U8 (2015–2018) · Petrol · ECU: Siemens/Continental Simos 18.10
Stage 1 remap: +80 bhp & +90 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi Q3 2.0 TFSI 220bhp gains +80 bhp and +90 Nm, rising from 220 bhp / 350 Nm to 300 bhp / 440 Nm (36% more power). We build each tuning file around the software number of your read on the Siemens/Continental Simos 18.10, so nothing generic goes back into the car. Add DECAT, DTC Removal, FLAPS, Pop & Bang Crackle map to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 220 → 300 bhp equals roughly 164 → 224 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1984 CC |
| Compression ratio | 9.6 : 1 |
| Bore × stroke | 82.5 X 92.8 mm |
| Engine code | CULC |
Other Audi Q3 U8 (2015–2018) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.