Audi Q3 1.4 TFSI 150bhp tuning file
U8 (2011–2015) · Petrol · ECU: Bosch MED17.5.25
Stage 1 remap: +20 bhp & +50 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Audi Q3 1.4 TFSI 150bhp from 150 bhp and 250 Nm to 170 bhp and 300 Nm – that's +20 bhp (13%) and +50 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MED17.5.25 and returned through the portal, normally within 5–15 minutes. Solutions such as DECAT, DTC Removal, FLAPS, Pop & Bang Crackle map can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 150 → 170 bhp equals roughly 112 → 127 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1395 CC |
| Compression ratio | 10.5 : 1 |
| Bore × stroke | 74.5 X 80.0 mm |
| Engine code | CZDA |
Other Audi Q3 U8 (2011–2015) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.