Audi Q3 45 TFSI-e 245bhp tuning file
F3 (2019–) · Petrol · ECU: Bosch MG1CS211 / Bosch MED17.1.27
Stage 1 remap: +25 bhp & +50 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi Q3 45 TFSI-e 245bhp gains +25 bhp and +50 Nm, rising from 245 bhp / 400 Nm to 270 bhp / 450 Nm (10% more power). We build each tuning file around the software number of your read on the Bosch MG1CS211 / Bosch MED17.1.27, so nothing generic goes back into the car. Add DPF / EGR solutions to the same file if needed.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 245 → 270 bhp equals roughly 183 → 201 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1395 CC |
| Compression ratio | 10.0 : 1 |
| Bore × stroke | 74.5 X 80.0 mm |
| Engine code | DGEA |
Other Audi Q3 F3 (2019–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.