Audi A6 30 TDI (2.0D) 136bhp tuning file
C8 (2018–) · Diesel · ECU: Bosch MD1CS004
Stage 1 remap: +49 bhp & +80 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Audi A6 30 TDI (2.0D) 136bhp from 136 bhp and 320 Nm to 185 bhp and 400 Nm – that's +49 bhp (36%) and +80 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MD1CS004 and returned through the portal, normally within 5–15 minutes. Solutions such as DPF / EGR solutions can go into the same file.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 136 → 185 bhp equals roughly 101 → 138 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 1968 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 81.0 X 95.5 mm |
| Engine code | DEZD |
Other Audi A6 C8 (2018–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.