Audi A6 3.0 TDI FWD 218bhp tuning file
C7 (2011–2018) · Diesel · ECU: Bosch EDC17CP54 / Bosch MD1CP004 / Bosch EDC17CP44
Stage 1 remap: +62 bhp & +120 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi A6 3.0 TDI FWD 218bhp gains +62 bhp and +120 Nm, rising from 218 bhp / 400 Nm to 280 bhp / 520 Nm (28% more power). We build each tuning file around the software number of your read on the Bosch EDC17CP54 / Bosch MD1CP004 / Bosch EDC17CP44, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 218 → 280 bhp equals roughly 163 → 209 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2995 CC |
| Compression ratio | 10.3 : 1 |
| Bore × stroke | 84.5 X 89.0 mm |
| Engine code | CRTE |
Other Audi A6 C7 (2011–2018) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.