Audi A5 3.0 TDI 286bhp tuning file
Mk3 (2016–2018) · Diesel · ECU: Bosch MD1CP004
Stage 1 remap: +64 bhp & +130 Nm
ECU
Read methods
Available solutions
With a bespoke remap the Audi A5 3.0 TDI 286bhp gains +64 bhp and +130 Nm, rising from 286 bhp / 620 Nm to 350 bhp / 750 Nm (22% more power). We build each tuning file around the software number of your read on the Bosch MD1CP004, so nothing generic goes back into the car. Add Adblue, DPF OFF, DTC Removal, EGR OFF to the same file if needed.
Who is this remap for?
On a diesel, the bigger gain is usually in torque. Expect stronger pulling from low revs, easier overtaking and a more relaxed drive on the motorway. 286 → 350 bhp equals roughly 213 → 261 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Diesel |
| Engine size | 2967 CC |
| Compression ratio | 16.0 : 1 |
| Bore × stroke | 83.0 X 91.4 mm |
| Engine code | DCPB |
Other Audi A5 Mk3 (2016–2018) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.