Audi A1 40 TFSI (2.0T) 200bhp tuning file
GB (2018–) · Petrol · ECU: Bosch MG1CS111 / Bosch MG1CS001
Stage 1 remap: +45 bhp & +110 Nm
ECU
Read methods
Available solutions
Upload the original read of your Audi A1 40 TFSI (2.0T) 200bhp and we'll return a Stage 1 tuning file worth 245 bhp and 430 Nm – up from 200 bhp and 320 Nm, an increase of +45 bhp (22%) and +110 Nm. Every file is checked by a calibrator on the Bosch MG1CS111 / Bosch MG1CS001 before release, and DTC Removal, Pop & Bang Crackle map, START/STOP OFF can be combined in one upload.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 200 → 245 bhp equals roughly 149 → 183 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1984 CC |
| Compression ratio | 11.7 : 1 |
| Bore × stroke | 82.5 X 92.8 mm |
| Engine code | CZPC / DKZC |
Other Audi A1 GB (2018–) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.