Audi A1 2.0 TFSI 256bhp tuning file
8X (2010–2014) · Petrol · ECU: Bosch MED9.1
Stage 1 remap: +44 bhp & +70 Nm
ECU
Read methods
Available solutions
Our Stage 1 tuning file takes the Audi A1 2.0 TFSI 256bhp from 256 bhp and 350 Nm to 300 bhp and 420 Nm – that's +44 bhp (17%) and +70 Nm more. The remap file is written by a calibrator for your exact software on the Bosch MED9.1 and returned through the portal, normally within 5–15 minutes. Solutions such as Anti lag, DECAT, DTC Removal, FLAPS can go into the same file.
Who is this remap for?
On a turbo petrol, a remap sharpens throttle response and pulls harder through the mid-range. For the best result we recommend running it on super unleaded (97–99 RON). 256 → 300 bhp equals roughly 191 → 224 kW.
Figures are guide values from our rolling road and comparable vehicles. Results depend on the vehicle's condition, hardware and fuel quality. Remapping in the UK: let your insurer know about the modification. DPF, EGR and AdBlue solutions are supplied for off-road and motorsport use only and are not legal for use on UK roads.
Engine specification
| Fuel type | Petrol |
| Engine size | 1984 CC |
| Compression ratio | 9.8 : 1 |
| Bore × stroke | 82.5 X 92.8 mm |
| Engine code | CDLH |
Other Audi A1 8X (2010–2014) engines
Try our tuning file service today
Open a free account on the file service portal, claim 5 test credits and upload your first read – most files are back with you in under 15 minutes.